Categories

System glitches and false alarms can be exasperating, and more importantly, could prevent your security system from working how it should. Luckily, most issues, from dead batteries to false alarms, are straightforward to remedy. Explore our suggestions for troubleshooting your home alarm system in Gaithersburg. We’ll help keep your family shielded and your system operating the way it should.

Test Your Home Security System In Gaithersburg

One effective way to troubleshoot your property’s security is to test it! The latest systems allow you to place them in test mode to avoid initiating an emergency response. Once in test mode, follow these steps:

• Activate your system as you would when you head out.
• Open a window or door that uses a contact sensor, or test other devices. Close the door or window so it doesn’t prompt the alarm as you switch out of test mode.
• Allow the alarm to resonate for 60 seconds to make sure a message is sent to the security company and an entry is created in the alarm activity log.
• Continue testing devices as you wish
• Inspect the system activity log to confirm that everything’s working.

Don’t worry, monitoring agents can tell that your alarm system is being tested. Just be sure to turn test mode off when done. It’s smart to test once a month or anytime you make changes to your home’s internet or phone provider.

Inspect The Positioning And State Of Motion Detectors

Although an essential element of your alarm system, motion detectors are notorious for false alarms. Prevent them with some simple troubleshooting.

• Do a visual inspection. Are there objects that could move within the detection path of the sensor, like drapery taken by a breeze?
• Is the sensor clean? Grime, dirt, and cobwebs can lead to malfunctions. Check to confirm the sensor is clean.
• Does the motion detector offer pet immunity you can enable? Some sensors can be set to ignore pets weighing up to 100 pounds.
• When was the battery replaced? A low battery can affect performance or cause false alarms.
• Is the sensor aimed toward a heat source? Excessive heat from direct sun or a fireplace can cause an alarm.

Keep Batteries Ready And Look Out For Low Battery Warnings

One helpful aspect of the latest home security systems is that they’ll alert you when batteries are running low. If your system uses a mobile app or control panel, you’ll usually find messages there. Depending on the alarm, you might notice an intermittent beep when batteries are low. 

Motion detectors, smoke detectors, contact sensors, and other wireless tools have batteries that need to be replaced every so often. It’s wise to keep batteries around and create a replacement schedule. Top systems also have a backup battery for the central control panel. This backup helps keep your system running if you lose power and should recharge itself once power is back online. If it doesn’t, you will have to replace it.

Troubleshooting Is Easy With ADT Home Security In Gaithersburg 

As the top name in home security, ADT designs systems that provide unsurpassed functionality and convenience. Accessing test mode is easy through MyADT.com or the ADT+ app, and you’ll always get notifications when a sensor battery is low. Reach out to Secure24 Alarm Systems, an authorized ADT dealer, to learn more and design a system perfect for your Gaithersburg home. Dial (301) 278-8866 or fill out our form today!